Lightweight windproof and rainproof hooded jacket. Water resistance (water column) - 10000 mmH2O, breathability - 7,500 g/mq/24h.
Dry Storm men's running jacket
Lightweight, breathable sports jacket, windproof and waterproof, protects against wind and rain. The ergonomic design perfectly follows the body's movements while running. Air circulation and ventilation are supported by a ventilation slit on the back. A durable sublimation print is applied to the three-layer fabric (polyester on the outside + membrane + fabric protecting the membrane on the inside).
On the front, the jacket features a long YKK zip to make it easy to unzip quickly and to put on and take off, a fitted hood, an extended back and easily accessible zipped pockets (2 side pockets + 1 Napoleon pocket on the chest). The jacket has traditional seams. The seams are not waterproofed or taped. Reflective elements guarantee visibility.
Jacket care:
1. Secure all zips and fastenings.
2. Machine wash at a warm temperature (110 ° F / 40 ° C) using a high-performance cleaner such as Nikwax® Tech Wash.
3. If you choose to use a conventional liquid laundry detergent, we recommend a second rinse to remove any traces of detergent from the fabric.
4. Tumble dry on a low heat setting to rejuvenate the garment’s durable water repellent finish (DWR).
5. Do not use fabric softeners, bleach or stain-removal products, and never dry clean the garment.
6. We do not recommend using an iron to rejuvenate the DWR finish, as an iron that is too hot can irreversibly damage the fabric.
The fabric has been treated with a durable water repellent finish (DWR). DWR acts as an invisible first line of defence in wet conditions and, when working properly, causes moisture to bead on the fabric surface and run off quickly. The DWR finish degrades over time and will need refreshing. A simple way to check the garment’s DWR is to lightly spray it with water and see whether the water runs off or is absorbed by the fabric. If the fabric “wets out”, it’s time to revive the DWR finish. When it’s time to refresh the DWR finish, it is recommended to use a replenisher such as Nikwax® TX.Direct Wash-In or TX.Direct Spray-On.
Choose the right size using the size chart.
If you don't know which jacket model to choose - SEE COMPARISON