Lightweight windproof and rainproof hooded jacket. Water resistance (water column) - 10000 mmH2O, breathability - 7,500 g / m2 / 24h.
Dry Storm women's running jacket
Lightweight breathable sports jacket, windproof and waterproof, protects against wind and rain. The ergonomic design moves perfectly with the body while running. Air circulation and ventilation are supported by a ventilation slit on the back. A durable sublimation print is applied to the three-layer material (polyester on the outside + membrane + material protecting the membrane on the inside).
On the front, the jacket features a long YKK zip for quick unzipping, putting on and taking off, a fitted hood, an extended back and easily accessible zip pockets (2 side pockets + 1 Napoleon chest pocket). The jacket has traditional seams. The seams are not impregnated or taped. Reflective elements guarantee visibility.
Jacket care:
1. Secure all zips and fastenings.
2. Machine wash warm (110 ° F / 40 ° C) using a high-performance cleaner such as Nikwax® Tech Wash.
3. If you choose to use a conventional liquid laundry detergent, we recommend a second rinse to remove any detergent residue from the fabric.
4. Tumble dry on a low heat setting to rejuvenate the garment’s durable water repellent (DWR) finish.
5. Do not use fabric softeners, bleach or stain removers, and never dry clean the garment.
6. We do not recommend using an iron to rejuvenate the DWR finish, as an iron that is too hot can irreversibly damage the fabric.
The fabric has been treated with a durable water repellent (DWR) finish. DWR acts as an invisible first line of defence in wet conditions and, when working properly, causes moisture to bead on the fabric surface and run off quickly. The DWR finish will deteriorate over time and will need to be refreshed. A simple way to check the garment’s DWR finish is to lightly spray it with water and see whether the water beads off or is absorbed into the material. If the fabric “wets out”, it’s time to revive the DWR finish. When it’s time to refresh the DWR finish, it is recommended to use a top-up product such as Nikwax® TX.Direct Wash-In or TX.Direct Spray-On.
Choose the correct size using the size chart.
If you don't know which jacket model to choose - SEE COMPARISON