copy of MEN'S RUNNING JACKET DVALPINE 3L

Men's running jacket DValpine 3L

Technical, ultra-light running jacket is the perfect complement to a running outfit in adverse weather conditions. Ergonomic design perfectly matches your body movements while running. The jacket has a protection zone ww - protect (water and wind). The protection zone is made of a breathable and waterproof Event membrane that protects against wind and rain. The three-layer material (polyester + membrane + polyester) has a permanent sublimation print on the outside, the inside of the jacket is gray. The front of the jacket has a long YKK zipper, which makes it easy to open, put on and take off. The jacket has a fitted hood, an elongated back and easily accessible zippered pockets (2 pockets on the sides + 1 Napoleonic pocket on the chest). The bottom of the jacket and the hood are finished with aesthetic rubber. Reflective elements ensure visibility.

Maintenance of outerwear eVent® fabrics - original fabric maintenance instructions available on the fabric manufacturer's website http://www.eventfabrics.com/fabric-care

1. Secure all locks and closures.

2. Machine wash at warm temperature (110 ° F / 40 ° C) with a high-performance cleaner such as Nikwax® Tech Wash.

3. If you decide to use conventional liquid laundry detergent, we recommend a second rinse to remove all traces of detergent from the fabric.

4. Tumble-dry using the low temperature setting to rejuvenate the clothes Durable Water Repellent (DWR) finish.

5. Do not use fabric softeners, bleach or stain removers, and never dry-clean the clothes.

6. We do not recommend using an iron to rejuvenate the DWR finish, as too hot an iron may irreversibly damage the fabric.

The fabric has a durable water-repellent (DWR) finish. DWR serves as an invisible first line of defense in wet conditions, and when properly used, it causes moisture to accumulate on the surface of the fabric and allow it to quickly drain away. The DWR finish will deteriorate over time and will need to be refreshed. An easy way to check a clothes DWR finish is to spray lightly with water to see if water is dripping or absorbing through the fabric. Once the fabric has dried, it's time to bring the DWR finish to life. When it is time to refresh the DWR finish, it is recommended to use a refill product Nikwax® TX.Direct Wash-In or TX.Direct Spray-On.